FTR16

Flow indicator for bulk solids
- Technical data

Detection range:	Max. 5 m
Operating frequency:	24.15...24.25 GHz
Electrical connection:	Plug M12
Output signal:	3-wire PNP
Power supply:	18...30 VDC
Housing:	Stainless steel 316L
Process connection:	Thread G 1 in accordance with ISO 228-1 Thread G 1½ in accordance with ISO 228-1 Thread 1½ NPT in accordance with ANSI/ASME
Optional process connection:	Flange Sight glass High-temperature adapter High-pressure adapter Mounting bracket Structured accessories FAR50, FAR51, FAR52 and FAR54 Individual customer solutions
Main wetted parts:	Contactless installation: no Mounting: 316L, PTFE
Ambient temperature:	-20...+60 °C
Process temperature:	Contactless installation: any Mounting: -20...+60 °C, with high-temperature adapter -20... +450 °C
Process pressure:	Contactless installation: any Mounting: 0.5...6.8 bar (50...680 kPa) abs., with high-pressure adapter 0.5...21 bar (50...2100 kPa) abs.
Protection acc. to EN 60529:	Non-hazardous area: IP69 Hazardous area: IP67
Vibration resistance - Endurance stress with sliding frequency acc. to EN 60068-2-6:	Excitation mode: sine Frequency range: 10...55 Hz Amplitude: 0.75 mm peak constant Speed of sweep: 1 oct / min Excitation direction: 3 directions (X, Y, Z) Number of cycles: 20 / direction Test duration: approx. 1 h 38 min / direction Test temperature: room temperature
Marking acc. to 2014/34/EU (ATEX):	ATEX II 1/2D Ex ta/tb IIIC Da/Db (BVS 11 ATEX E 032)
Marking acc. to IECEx:	IEC Ex ta/tb IIIC Da/Db (IECEx BVS 11.0016)
Radio approval:	Richtlinie 2014/53/EU (RED) FCC